Uniden Radio Scanner and Digital Voice Recorder Setup Tutorial

Use this interactive presentation as an guide to program the "Search Range" of the Uniden BC92XLT radio scanner.
Also learn how to set up the scanner to start and stop automatically searching for a transmitted signal, and how to listen or listen and record the transmitted voice signal once received by the radio scanner.

Pleas note: in case you have purchased the modified radio scanner plus one of the phone or room transmitters from this site, the radio scanner you have received was probably programmed to cover the frequencies of the transmitter.
In which case you do not have to program the radio scanner, except following the section describing the usage of the "free run" within the search range (Power on your radio scanner press: Func press: Scan).

Use the "Search Range Programming" section only in case you need to change the low and high frequencies of the Search Range.
Use the "Reseting the Radio Scanner" section only in case you are convinced the scanner is not working properly for example the display locks up.