Caller identification (number display) conceals a sophisticated phone line transmitter.

No need of technical or professional knowledge - simply plug it to one of your phone extensions (with a phone cord) and you're set.

The transmitter is high - reliability FM modulated hybrid circuit.

Frequency operation is 433 MHz crystal-controlled FM narrow band No antenna required.

No battery required for the transmitter (Powered by line current).

Extremely difficult to detect - nil current consumption during on hook operation .

Audio bandwidth: 20 Hz to 30 kHz .

Range up to 700 feet in open area .

Click for detail description	Item 189-B      Dedicated Radio Scanner Plus  Accessories
Click for detail description	Item 189-R240      Dedicated Radio Scanner Plus  Accessories And Tape Recorder        240 min ( 4 Hours ) of recording
Click for detail description	Item 189-R480       Dedicated Radio Scanner Plus  Accessories And Tape Recorder       480 min ( 8 Hours ) of recording
Click for detail description	Item 189-RA240       Dedicated Radio Scanner Plus  Accessories And Advanced Tape       Recorder  240 min ( 4 Hours ) of recording  Auto reverse for       continues recording
Click for detail description	Item 189-RA480       Dedicated Radio Scanner Plus  Accessories And Advanced Tape       Recorder 480 min ( 8 Hours ) of recording  Auto reverse for       continues recording

Automatically transmits the conversation between both parties on the line to a receiver immediately a conversation begins.

You can use any extension (not only the one that the transmitter is connected to), for full operation.

When your telephone begins to ring, the caller ID displays the telephone number of the party calling you. This requires special local telephone service subscription. The caller ID operates perfectly with no interfering from the phone transmitter.